Package Contents - ECS P5SJ-A User Manual

P5SJ-A User's Manual
1: Package & Product Information – 1.3

Package Contents

The P5SJ–A mainboard package contains the following items,
as noted in the Quick Installation Guide. We've listed them here
again for your convenience. Please inspect the package contents
and confirm that everything is there. If anything is missing or
damaged, call your vendor for instructions before proceeding.
The package includes:
• P5SJ–A Mainboard
• Cable Pack:
– 1 Floppy Controller Cable
– 1 IDE Controller Cable
– 1 VGA Port Bracket with attached cable (SIS 5598 model)
• Optional Hardware:
– External USB dual-port bracket
• Support CD:
– IDE Bus Master Drivers
– Display Drivers
The SIS VGA display comes with drivers for a wide range of
Operating Systems. These are organized in individual folders. In
each folder there is a "readme" file that explains how to install
the driver. Please locate the folder for the driver you need and
check this file.
G
P5SJ–A Models
There are two P5SJ–A main-
board models. One has an
onboard video display fea-
ture – SIS5598, the other –
SIS5582– does not. If you
have the model with the
onboard display feature, it
comes with an external VGA
port bracket with an attached
cable that connects to the
mainboard. Other than this
feature, the two models are
the same.
You can tell which model you
have by looking at the big
green heat sink in the middle
of the board. The SIS chip
number is printed on it.