ECS P5SJ-A User Manual page 81

P5SJ-A User's Manual
4: Reference Information – 4.37
Load BIOS Defaults
To invoke this command highlight it in the main menu and
press Enter. A message will appear asking if you want to load the
BIOS defaults. Press the Y key and then the Enter key. The BIOS
default settings will load. Press the N key if you want to cancel.
This loads a set of troubleshooting default values permanently
stored in the BIOS ROM. The settings are not optimal and turn
off all the performance features. Standard CMOS Setup is not
affected by this command.
Load Optimum Settings
To invoke this command highlight it in the main menu and
press Enter. A message will appear asking if you want to load the
Optimum Settings. Press the Y key and then the Enter key. The
Optimum Settings will load. Press the N key if to cancel.
This loads a set of optimized default values permanently stored
in the BIOS ROM. Use this command to load default settings for
normal system operation. Standard CMOS Setup is not affected
by this command.