Jumper Configuration Summary - ECS P5SJ-A User Manual

P5SJ-A User's Manual
4: Reference Information – 4.3

Jumper Configuration Summary

This section lists the jumper setting options for this mainboard.
The settings are listed as follows:
• The two pins shorted by a jumper cap on a three-or-more-pin
jumper, e.g. 1-2
or
• For a two-pin jumper, On, if the cap is in place, and Off, if a
cap is not in place.
In the jumper illustrations, the Pin 1 position is shaded and
the jumpers, shown in a "bird's eye" view, look like this:
A jumper with a cap in position looks like this:
The default settings are noted in the summary tables. Unless
you need to upgrade the CPU, disable the onboard VGA feature
or upgrade the BIOS, you should not need to change them.
In practice, for an Off setting
C
on a two-pin jumper, place
the cap over one pin so that it
doesn't get lost.