Making A Call Using On-Hook Dialing - Nortel 1120E User Manual

Making a call

Making a call using on-hook dialing

You can make a call by using on-hook dialing. You enter the SIP address
or phone number before going off-hook.
Note: When using this method you cannot toggle between alphabetic
or numeric input, so this method may not work.
Use these steps to make a call by dialing before initiating the call:
On-hook dialing:
Chad
72
1. Dial the number or SIP address.
2. Continue the call by:
— Pressing the
— Lifting the handset
— Pressing the
— Pressing the
3. To terminate the call, choose one of the
following:
— Replace the handset into the cradle.
— Press the
line feature key
Headset fixed key
Handsfree fixed key
Goodbye key.