Nortel 1120E User Manual page 38

Entering text
Figure 11: Context-sensitive soft key abc/123
For example, if you want to enter the letter "a", press the
Context-sensitive soft key to switch to alphabetic input and press the
number 2 key once. If you want to enter the upper case letter "C", press
the number 2 key six times. You can cycle through the letters (and the
actual number) by repeatedly pressing the number button.
Names or words, which have two adjacent letters, that require the same
button, such as in the word "press", are entered by entering the first
character, briefly pausing, and entering the next letter. You press the
dialpad key 6 for the "p" pause a moment and press it again twice to cycle
to the letter "r".
When entering alphanumeric information, the
represents the characters in Table 4. To enter a special character, press
the dialpad number
one you need. For example to enter a question mark ("?"), press the
number 1 key eight times.
Table 4: Alphanumeric characters for Dialpad key 1
Character
@
.
-
_
38
1 to cycle through the characters until you reach the
Name
at
period
dash
underscore
abc/123
1 key on the dialpad