Cisco 7942G Administration Manual page 71

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
PC Port Configuration Speed and duplex of the access port (labeled
10/100/1000 PC). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the
port on the switch to the same speed/duplex as the
phone, or configure both to auto-negotiate.
If you change the setting of this option, you should
change the SW Port Configuration option to the same
setting. This ensures that the PC receives the full
benefits of the network operating speed.
PC VLAN Allows the phone to interoperate with 3rd party
switches that do not support a voice VLAN. The
Admin VLAN ID option must be set before you can
change this option.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Network Configuration Menu
To Change
Unlock network configuration options.
1.
Scroll to the PC Port Configuration
2.
option and then press the Edit softkey.
Scroll to the setting that you want and
3.
then press the Select softkey.
Press the Save softkey.
4.
1. Unlock network configuration options.
Make sure the Admin VLAN ID option
2.
is set.
3. Scroll to the PC VLAN option, press
the Edit softkey, and then enter a new
PC VLAN setting.
Press the Validate softkey and then
4.
press the Save softkey.
4-7