Cisco 7942G Administration Manual page 107

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Immediate Divert Allows a user to transfer a ringing, connected, or
held call directly to a voice-messaging system.
When a call is diverted, the line becomes available
to make or receive new calls.
Immediate Allows users to transfer incoming calls directly to
Divert—Enhanced their voice messaging system or to the voice
messaging system of the original called party.
Intercom Allows users to place and receive intercom calls
using programmable phone buttons. You can
configure intercom line buttons to:
Note
Join/Select Creates a conference by joining together existing
calls that are on a single phone line.
Allows users to apply the Join feature to calls that
Join Across
are on multiple phone lines.
Lines/Select
(SCCP only)
Line select
ringing line is selected. When enabled, the primary
line is picked up even if a call is ringing on another
line. The User must manually select the other line.
Note
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Directly dial a specific intercom extension.
•
Initiate an intercom call and then prompt the
•
user to enter a valid intercom number.
If your user logs into the same phone on a
daily basis using their Cisco Extension
Mobility profile, assign the phone button
template that contains intercom
information to their profile, and assign the
phone as the default intercom device for
the intercom line.
If this feature is disabled (default), then the
This feature can also be enabled or
disabled for Extension Mobility.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Immediate Diver"
chapter.
For more information, refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Features
•
and Services Guide, "Call Park and
Directed Call Park" chapter.
Cisco Unified Communications Manager
Feature and Services Guide, "Intercom
chapter"
For more information, refer to Cisco
Unified IP Phone Guide, "Basic Call
Handling" chapter, "Making Conference
Calls" section.
For more information:
See the "Configuring Softkey Templates"
•
section on page 5-18
Refer to Cisco Unified Communications
•
Manager System Guide, "Cisco Unified IP
Phones" chapter.
For more information, refer to the option
"Always use prime line" in the following
chapters of Cisco Unified Communications
Manager Administration Guide:
"Device Profile Configuration Settings"
•
"Common Phone Profile Configuration
•
Settings"
"Phone Configuration Settings"
•
5-9