Introduction; User Interface Operation - Konica Minolta PagePro 1390 MF User Manual

Introduction

This machine allows you to scan from a TWAIN-compliant or plug-in applica-
tion. Since the scanner driver is not stand-alone software, it has to be started
from a TWAIN-compliant application to be able to scan and load an image to
your computer. The command to start the scanner driver may vary depending
on the application. To determine the correct command, refer to the user man-
ual for the application.

User Interface Operation

1
Position the document to be
scanned.
For details on positioning
the document, refer to
"Placing a Document on
the Flatbed Glass" on page
34 and "Loading a Docu-
ment into the ADF" on
page 35.
If you are using the flatbed
glass to scan, do not load
any documents into the
ADF.
2
Start the application to be used for scanning.
3
Start the scanner driver according to the application settings.
4
Specify the necessary scanner driver settings.
5
Click the Scan button in the scanner driver.
38 Introduction