Table of Contents
Advertisement
LOADING THE OVEN
Open the door. Place the product to be cooked in suitable containers and slide into the racks or place
the containers securely on shelves in the oven.
When loading a 10 level oven with landing table (Fig. 4), the bottom frame of the rack should be secured
by the rotary lock. Move the loaded landing table to the front of the open oven; secure the landing table
to the oven by actuating the locking-clamp (or use your body to hold the landing table against the oven).
Rotate the lock-knob to release the rack and carefully roll the loaded rack into the oven, making sure
that the landing table does not separate from the oven during the transfer.
NOTE: When the landing table is not in use in the 10 level oven, make sure the insert retainer (delivered
with the oven) is fitted under the fan baffle to prevent the rack from tilting when pans are being removed.
When loading a 20 level oven with the trolley (Fig. 5), make sure the handle is locked in the down
position so the rack is held securely to the trolley with its lifting hooks. Carefully move the loaded trolley
completely into the open oven. When the rear frame of the rack is positioned behind the edge of the
retainer, raise the handle to lower the rack-frame to the oven floor.
Fig. 4
Fig. 5
UNLOADING THE OVEN
Allow the door to be 'slightly-opened' for a few seconds to allow hot air and steam to escape. Stand
behind the door while opening.
When unloading a 10 level oven, move the landing table (Fig. 4) so the clamp locks the landing table
to the front of the oven (or use your body to hold the landing table against the oven). Remove the
landing table handles and clamp them to the bottom of the hot oven rack. Carefully roll the hot rack
onto the landing table platform, making sure that the landing table does not separate from the oven
during the transfer. Rotate the knob to allow the rack to move completely to the front of the landing
table; and rotate the knob back to lock the rack in place.
When unloading a 20 level oven, move the trolley (Fig. 5) into the oven until the "lift-hooks" are inserted
into both sides of the front frame of the rack in the correct "lift" position. Lower the trolley handle until
it stops; the loaded-rack is lifted from its retainer and held securely to the trolley by the "lift-hooks".
The trolley may now be removed from the oven with the loaded rack securely held in place.
9
Advertisement
Table of Contents
