Table of Contents
Advertisement
This operation is required if there a change of either the power assembly, the screen card or a change of FastPad software.
Before programming check the software is in the local language and change if necessary.
2.1 SETTING THE SOFTWARE LANGUAGE
- Select the "TOOL BOX" menu
- Select the "Client parameters" screen
- Enter the password « CHEF » : Permanent password (lower or uppercase)
- Validate "V" : When finished, if the code is correct access the menu in not re-enter the PIN number.
- Modify the programme language if necessary (En : English by default)
* Select the zone of the value to be changed
* Adjust the value using the coder knob
2.2 OVEN SETTINGS
- Select the "TOOL BOX" menu
- Select the "Technician parameters" screen
- Enter the password : « SAVB »
- Validate "V" : When finished, if the code is correct access the menu in not re-enter the PIN number.
- Reconfigure the oven
* Select the zone of the value to be changed
* Adjust the value using the coder knob
Page 10
2.
PROGRAMME DE PARAMETRAGE
VULCAN
A division of ITW Food Equipment Group LLC
P.O. Box 696
Louisville, KY 40201
3VE490058EM – 12/21
Advertisement
Table of Contents
