Oven Controls; Operation; Before First Use - Vulcan-Hart VCV13 Installation & Operation Manual

VCV SERIES COOK AND HOLD OVEN SYSTEMS

OVEN CONTROLS

All operating controls are located on the front
Control Panel(s). The oven is supplied with
individual operating controls for each
oven cavity.
Each Control Panel contains:
• Power ON/OFF Switch
• HOLDING TEMPERATURE knob
• ROASTING TEMPERATURE knob
• ROASTING TIME knob
• Holding Temperature Indicator Light
• Roasting Temperature Indicator Light
olding Roasting
Temperature Time
Knob Knob
olding Temperature Power
Indicator ON/OFF
Light Switch
Figure 6: VCV13 and VCV6
Operating Controls

OPERATION

Roasting
Temperature
Knob
Roasting Temperature
Indicator
Light
— 8 —
Holding Temperature
Roasting Temperature
Indicator
Light
Holding Roasting
Temperature Time
Knob Knob
Figure 7: VCV4 and VCV5
Operating Controls

BEFORE FIRST USE

Thoroughly clean the oven before initial use.
1. Remove the Interior Side Racks and the
Air Tunnel from the cabinet.
2. Take the Interior Side Racks and the Air
Tunnel to a sink or dishwasher for a
thorough cleaning.
Avoid splashing water into the
upper areas of the cabinet
damage to electrical components or
connections.
Never spray the unit with a hose.
Note: Never use harsh chemicals or abrasive
pads to clean the cabinet.
3. Use a mild soap and water solution to
clean these items.
4. Wring out the cloth so it is only damp and
not soaking wet.
5. Reassemble oven.
ower
Indicator
ON/OFF
Light
Switch
Roasting
Temperature
Knob
to prevent