Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Customising your base unit
Ringer volume
The base unit has ten ringer volume levels, including 0
and melody
for off; and eight ringer melodies. With the volume set
to 0, the base unit will not ring for an incoming call.
To change the volume:
1
Press the PROG button then 2 1 1
‡
2
Use the
or
volume
3
Press the PHONE/OK button to confirm
To change the melody:
1
Press the PROG button then 2 1 2
‡
2
Use the
or
melody
3
Press the PHONE/OK button to confirm
Call barring
You can set call barring for individual handsets registered
to your base unit. There are two kinds of call barring:
You can bar calls to up to two specific numbers
(which can be dialling codes) with up to eight digits
each. With this option, you need to program in the
numbers first, then turn the barring on and off.
You can bar certain types of call — no outside calls,
or no international calls.
When either kind of call barring is turned on, you may
not be able to make a call, and you may see a 'key'
symbol on the display.
40
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
ˆ
button to change the
ˆ
button to change the
Advertisement
Table of Contents
