Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Troubleshooting
"My call was cut
Move the handset closer to the base unit before you try
again to make a call.
off when I went
out of range.
Now I can't use
my handset."
"There is inter-
Move the handset closer to the base unit, or to a
different position.
ference and
noise on the
Try moving the base unit so that it's not near other
line."
electrical equipment, such as a television or a
computer.
You'll get the best results if you site the base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
"I hear 'beeps'
You may be going out of range of the base unit. Move
from my
closer, or your call may be cut off.
handset while
Check the Battery Level symbol on the display. If it is
I'm on a call."
low, recharge the batteries.
"When I try to
If you're using a e820 Twin system, or have extra
make a call, I
handsets registered to your base unit, check that
hear Busy
another handset isn't already in use on a call.
tone."
48
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Advertisement
Table of Contents
