Table of Contents
Advertisement
CONTROLS AND DISPLAYS
REMOTE CONTROL
This section explains how best to use the RC-600 remote control to operate the SL-100.
The only buttons that can be used for this unit are
located in the "AMPLIFIER USE ONLY" section of the
remote.
1. POWER: Use to turn the power on and off.
2. MUTE: Use to mute the sound. Press again to
resume sound.
3. VOLUME: Use the buttons to adjust the volume of
the SL-100 from Volume 0 to Volume 63.
4. INPUT SELECTOR: Use the buttons for remote
selection of the various inputs of the SL-100.
5. BALANCE: Use the buttons to fine-tune the relative
balance of the Left and Right channel from your
listening position using the balance buttons in 1 dB
increments.
6. MODE 1 & 2: Not used.
11
Advertisement
Table of Contents
