Table of Contents
Advertisement
View Alarms
The Command Line Interface (CLI) enables you to view alarms through the Monitor mode. You can view
active alarms, as well as view an alarm history list.
You are now ready to view active alarms and an alarm history, or both. See the sections which follow:
Display all Alarms
You are able to display both active alarms and an alarm history as follows:
1. Through CLI, access the Monitor prompt.
2. Type alarm. Both active alarms and the alarm history will be displayed. See section How to Read Alarms
for field definitions.
IP# Sequence# Severity Desc Slot# Device# Line# Channel# Date/Time
193.173.179.185:602:ALR:3:Border Element connection lost:0:0:0:0:FRI FEB 22 21:48:53 2002
Display Active Alarms
1. Through CLI, access the Monitor prompt.
2. Type alarm a. The active alarms will be listed. See section How to Read Alarms for field definitions. If
you enter alarm without a command following it, both active alarms and the alarm history will be dis-
played.
IP# Sequence# Severity Desc Slot# Device# Line# Channel# Date/Time
193.173.179.185:602:ALR:3:Border Element connection lost:0:0:0:0:FRI FEB 22 21:48:53 2002
P/N 480-0005-00-15
Figure 7-1 Alarm sample
Figure 7-2 Active Alarm Sample
Chapter 7: System Alarms
7-8
Advertisement
Table of Contents
