Table of Contents
Advertisement
DSP Status LEDs. LEDs provide a high level indication of the DSP card activity. See Chapter 8: Diagnos-
tics/Maintenance for a detailed description for troubleshooting purposes.
There are eight status LEDs on the card:
•
DSP Bank 1: Lights for any DSP card activity on that bank.
DSP Bank 1a: Lights when DSP card activity is more than 50%.
•
DSP Bank 2: Lights for any DSP card activity on that bank.
DSP Bank 2a: Lights when DSP card activity is more than 50%.
•
DSP Bank 3: Lights for any DSP card activity on that bank.
DSP Bank 3a: Lights when DSP card activity is more than 50%.
•
DSP Bank 4: Lights for any DSP card activity on that bank.
DSP Bank 4a: Lights when DSP card activity is more than 50%.
Hot Swap. A lit blue light indicates that the DSP card is not in service.
P/N 480-0005-00-15
Chapter 2: Hardware Components
2-30
Advertisement
Table of Contents
