Wall Installation - AT&T 924 User Manual

924 book_1ATT 8/8/00

Wall Installation

1 Reverse the handset tab.
Switchhook
Handset tab
2 Remove the base.
3 Connect the bundled line
cords to the telephone.
Leave the telephone line cords
bundled. See Step 1 in
"Table/Desk Installation" for
line cord connections.
4 Connect the handset cord.
Plug one end of the coiled handset cord into the jack on the
bottom of the phone. Pass the cord through the channel from the
jack to the side of the phone. Plug the other end into the handset,
and hang up.
11:24 AM Page 7
a) Hold down b) Turn tab so
switchhook;
slide tab up
and out.
Channel
Jack
INSTALLATION
c) Insert the
the end with tab back
the "hook" into its slot.
is up.
Remove
7