924 book_1ATT
8/8/00
INSTALLATION
5
Turn the base and attach it to the bottom of the phone.
a) Turn
6
Connect the power adapter.
Fit the power cord behind the strain relief tab. Then plug the
smaller end into the power jack on the back of the system.
Plug the power cord into an electrical outlet that is not controlled
by a wall switch.
7
Mount the phone on the wall
8
Follow Steps 6 and 7 under Table/Desk Installation.
8
11:24 AM
Page 8
Use only the power adapter provided with this product. To
obtain a replacement, call 1 800 222-3111.
b) Attach