AEG BP5014301 User Manual page 37

Problem
The oven does not heat
up.
The oven lamp does not
operate.
The Pyrolysis does not
start. The display shows
C3.
The display shows F102.
The core temperature
sensor does not oper-
ate.
The oven does not heat
up. The display shows
Demo.
Possible cause
The fuse in the fuse box
is released.
The oven lamp is defec-
tive.
The door is not fully
closed or the door lock is
defective.
The door is not fully
closed or the door lock is
defective.
The plug of the core
temperature sensor is
not correctly installed in-
to the socket.
The demo mode is acti-
vated.
ENGLISH
Remedy
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the oven lamp.
Fully close the door.
1. Fully close the door.
2. Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
3. If the display shows
F102 again, contact
the service centre.
Put the plug of the core
temperature sensor as
far as possible into the
socket.
1. Deactivate the appli-
ance.
2. Press and hold the
button +.
3. When an acoustic
signal sounds, turn
the knob for the
oven functions to the
first function. Demo
flashes in the dis-
play.
4. Turn the knob for
the oven functions to
the off position.
5. Release the button
+.
6. Turn the knob for
the temperature
clockwise for three
seconds. The acous-
tic signal sounds
three times. The
demo mode is deac-
tivated.
37