HP DL360 Maintenance And Service Manual page 48

To replace the processor:
1. Install the processor into the socket (1).
2. Close the processor locking lever (2).
Figure 2-41: Installing and locking a processor in the socket
3. Remove the protective covering from the heatsink.
Figure 2-42: Removing the heatsink protective covering
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
CAUTION: Heatsinks have an integrated, plastic-covered thermal pad. Remove the plastic
cover from the new heatsink to expose the adhesive side of the thermal pad before placing
the heatsink on the processor.
Removal and Replacement Procedures
2-37