Symbols On Equipment - HP DL360 Maintenance And Service Manual

Removal and Replacement Procedures

Symbols on Equipment

Weight in kg
Weight in lb
CLASS 1 LASER PRODUCT
2-2
This symbol indicates that the component exceeds the recommended weight for
one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for
manual material handling.
This symbol indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface
to cool before touching.
This symbol indicates the presence of hazardous energy circuits or electric
shock hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open
this enclosure. Refer all maintenance, upgrades, and servicing to qualified
personnel.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment,
do not plug telephone or telecommunications connectors into this receptacle.
This label or equivalent is located on the surface of the CD-ROM drive. This label
indicates that the product is classified as a Class 1 Laser Product.
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide