HP DL360 Maintenance And Service Manual page 40

Removal and Replacement Procedures
5. Disconnect the I/O system fan assembly power cables (1) and the optical device/diskette
drive interface board power cable (2).
Figure 2-32: Disconnecting I/O system fan assembly and power
converter module power cables
6. Disconnect the optical device/diskette drive cable (1).
7. Loosen the thumbscrews securing the interface board to the server chassis (2).
8. Pull the interface board forward, tip it, and remove it from the server chassis (3).
Figure 2-33: Removing the optical device/diskette drive interface
board from the chassis
Reverse steps 1 through 8 to replace the optical device/diskette interface board.
2-29
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide