Transmitting A Dtmf Code Sequence - Icom IC-G80 Instruction Manual

■ Transmitting a DTMF code sequence

The transceiver has two methods of transmitting a DTMF
code sequence. Select an option in the Set mode.
q Push [FUNC](M), and then [SET](8) to enter the Set mode.
w Push [] or [] to select the DTMF TX key item (dmt).
e Rotate [VOL] to select an option.
• dmt.k : Transmits the appropriate DTMF code assigned to the
key.
• dmt.m : Transmits the programmed DTMF code sequence in the
DTMF memory channel assigned to the key.
r Push [# ENT](MN.W) to exit the Set mode.
D Manual DTMF code transmission
First, set the DTMF TX key to "dmt.k" in the Set mode.
➥ While holding down [PTT], push the keys to transmit a
DTMF code sequence manually.
• Push [0]–[9] for "0"–"9," [MONI] for "A," [] for "B," [] for "C,"
[ ] for "D," [M] for "M," and [# ENT](MN.W) for "#."
D Using a DTMF memory channel
First, set the DTMF TX key to "dmt.m" in the Set mode.
➥ While holding down [PTT], push one of the keys to trans-
mit the DTMF code sequence in the memory.
• Pushing [0] to [9], [MONI](A), [](B), [](C), [
(E), or [# ENT](MN.W)(F) transmits a DTMF code channel (d0–
d9, dA, dB, dC, dD, dE or dF) respectively.
8
DTMF MEMORY
](D), [M]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28