Transmitting A Dtmf Code Sequence - Icom IC-V85 Instruction Manual

7
DTMF MEMORY
• DTMF memory indication
The DTMF memory consists of 5 pages that are 1st to 5th,
6th to 10th, 11th to 15th, 16th to 20th and 21st to 24th dig-
its.
• 1st page indication
• 3rd page indication
Appears
• 5th page indication
Blinks
33
• 2nd page indication
Appears
• 4th page indication
Appears
■ Transmitting a DTMF code
sequence
D Using a DTMF memory channel
q Push [FUNC], then push [
OPT
• Rotate [VOL] to select "dtm.OF," if necessary.
A
OPT
Push 0
FUNC
w Push and hold [
](0) for 1 sec. to select the DTMF mem-
OPT
ory.
OPT
Push 0 for 1 sec.
e Rotate [VOL] to select the desired memory.
r Push [MONI] or [PTT] to exit the DTMF memory mode.
• Selected DTMF code sequence sounds when [MONI] is pushed.
tWhile pushing [PTT], push [MONI] to transmit the selected
DTMF memory.
• After the DTMF code sequence is transmitted, the transceiver re-
turns to receive automatically.
](0) to enter
OPTION SET MODE
.