[Vol] Function Assignment - Icom IC-G80 Instruction Manual

4
BASIC OPERATION

■ [VOL] function assignment

[VOL] can be used as a channel selector instead of [] and
[], to suit your preference. However, when [VOL] functions as
a channel selector, [] and [] function as volume controls.
q While holding down [] and [], turn ON the power to
enter the Initial Set mode.
w Push [] or [] to select the dial assignment item. (tOP)
e Rotate [VOL] to select an option.
[VOL]
r Push [# ENT](MN.W) to exit the Initial Set mode.
17
[VOL] functions as the volume control.
[VOL] functions as the channel selector.
[VOL] and []/[] function as described below, depend-
ing on the option.
Option [VOL]
tOP.VO Volume control
tOP.di Channel selector
[]/[]
Channel selector
Volume control