7. Phone Controls
7.1 Displaying the Date and Time
You can change your phone display to show the date and time, using the TmDay function.
· This function overwrites all other display information.
· TransTalk MDW 9040 users do not have access to this feature.
To set/cancel the date and time display
· Press the programmed TmDay DSS key.
· Alternatively:
1. Press
Menu.
2. To search, press
7.2 Call Timer
You can run a call timer. If you start the timer before making a call, it will reset to zero when you dial and again when
you are connected. TransTalk MDW 9040 users do not have access to this feature.
· After ending a call, the timer is switched off.
To start the call timer
· Press the programmed Timer DSS key.
· Alternatively:
1. Press
Menu.
2. Press Timer.
7.3 Changing the Volume
You can alter the volume of the speakerphone, the handset speaker and the ringer.
To change the ringer volume
· Without lifting the handset, press either end of the volume button.
To change the speaker volume
1. Lift the handset to adjust handset volume or press
2. Press either end of
4400/6400
IP Office
and
Next/Prev and then press TmDay.
Volume. To adjust the volume up or down, press either
Spkr to adjust the speakerphone volume.
15-601074 Issue 12b (07 February 2010)
or
.
Page 30