Managing Incoming Calls
Distinguishing Calls
Rejecting Calls
Note
To place a call to a contact in the Corporate Directory:
1. Press
, and then select Features > Corporate Directory.
The Corporate Directory screen displays.
2. Scroll to the contact you want to call. Or, search for the contact (see
Searching for Contacts in a Corporate Directory
You can also use the * key to Page Up and the # key to Page Down.
3. Press the Dial soft key.
You can manage incoming calls from the contacts in your directory by doing
the following:
•
Setting up a distinctive ring tone for a contact.
•
Rejecting calls from a particular contact by sending the call to your
voice mail system. (If you do not have a voice mail system set up, the call
will still ring on your phone.)
•
Diverting calls from a particular contact to another party.
You can customize your phone so that you can distinguish callers by certain
ring tones. For information on setting a distinctive ring tone for a particular
contact, see
Setting Distinctive Ring Tones for Contacts
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail system. (If you do not have a voice
mail system set up, the call will still ring on your phone.)
Rejecting calls is not available on shared lines.
Customizing Your Phone
on page 2-20).
on page 2-10.
2 - 23