2. After that, the search should begin and its status should be displayed.
3. Found cameras should be listed and simply select a camera from the list
and press "Configure".
4. It's corresponding information should be displayed in the "Camera
Information" section. Enter its username and password and select the channel
ID and name the camera.
5. Click on "Detect" to establish connection between the recorder and the
camera. If connection establishes successfully, camera's de- tailed information
should be polled and displayed as below.
6. Adjust its video format, frame rate, resolution or bitrate...etc if you wish. You
can also click on the "Preview" to preview the live video of the camera.
Click "Add" to finish adding the camera.