System Options; Device Information - Planet NVR-810 User Manual

1. Use the "Camera" drop-down menu and select a camera first.
2. You can use the schedule table to set the time range. Click the cell boxes
then move the curser horizontally lets you set what hours to perform
recording during a day. Click and move vertically lets you set what days to
perform recording at a specific time.
* Each cell box represents 15 minutes of time. Click one or more boxes to
omit consecutive recording.
3. You can also use the "Quick Configuration" to define recording time range
instead of clicking cell box one by one on the time table. Simply check what
days you would like to perform recording and specify the recording duration
by either choosing "All Day" or enter a start and end time for specific
recording duration.
4. Select the "Copy to" option if you would like to set the same re- cording
schedule to another camera.

6.5 System Options

System Options gives users a glance of the overall system status and allows
users to perform maintenance tasks such as upgrading firmware,
restore/backup device settings or reboot device ....etc.

6.5.1 Device Information

The "Device Information" provides the general information of the device such
as firmware version and system time. It also provides information of the
current network settings and status.