Olympus FE-320 Quick Start Manual page 48

When you get an error message on the camera...
Disconnect the camera and connect it again
correctly.
The camera is not
connected to the computer
or the printer correctly.
~
NO CONNECTION
Monitor indication Possible cause Corrective action
OJ There is a problem with the This card cannot be used. Insert a new card.
CARD ERROR
card.
OJ
Writing to the card is The recorded image has been protected
prohibited.
(read-only) on a computer. Download the
WRITE PROTECT
image to a computer and cancel the read-
only setting.
ill
The internal memory has no
Insert a card or erase unwanted data. Before
available memory and
erasing, backup the data of important
MEMORY FULL
cannot store any new data. pictures using the card, or download such
pictures to a computer.
rn
The card has no available Replace the card or erase unwanted data.
memory and cannot store Before erasing, download important pictures
CARD FULL
any new data.
to a computer.
,----"
There are no pictures in the
The internal memory or the card contains no
I I
I I
internal memory or on the pictures.
" _ _ _ _ 1
NO PICTURE
card. Record pictures.
OJ
There is a problem with the Use image processing software to view the
~
selected picture and it
picture on a computer. If that cannot be
Q)
PICTURE ERROR
cannot be played back on
done, the image file is damaged.
-
-
this camera.
Q)
.0
OJ
Pictures taken by other Use image processing software to edit the
ro
~
THE IMAGE
cameras or previously
pictures.
Q)
E
CANNOT BE
edited or corrected pictures
ro
EDITED
cannot be edited orfixed.
()
~
Ci
The battery/card Close the battery/card compartment cover.
;:,
0
compartment cover is open.
>-
~
CARD-COVER
0
OPEN
c
~
(=:J
The battery is empty.
Charge the battery.
0
-
BATTERY EMPTY
0>
• Select [CLEAN CARD], and press F~"c.
c
The data in the card cannot
:.0::-
be read. Or, the card is not
Remove the card and wipe the contact
-
Q )
formatted.
area with a soft dry cloth.
t?
• Select [FORMAT] ~ [YES] and press ~.
All data on the card is erased.
There is an error in the
select~EMORY
FORMAT]
~
[YES] and
internal memory.
press
':c.
All data in the internal memory is
erased.
I
~
I
NO PAPER
There is no paper in the
printer.
Load some paper into the printer.
~
~
NO INK
The printer has run out of
ink.
Replace the ink cartridge in the printer.