Olympus FE-320 Quick Start Manual page 40

g ..
2
Make the following preparations for
disconnecting the USB cable.
Windows
CD
Click the "Unplug or Eject Hardware" icon
'~
in the system
tray.
(1) Click the message that is displayed.
@
When a message is displayed saying that the hardware can
be ejected safely, click "OK".
Macintosh
CD
The trash icon changes to the eject icon when the "Untitled"
or "NO_NAME" icon on the desktop is dragged. Drag and
drop it on the eject icon.
3
Disconnect the USB cable from the camera.
U
Note
• Windows: When you click "Unplug or Eject Hardware", a warning message may be displayed.
Make sure that image data is not being downloaded from the camera and that all applications
are closed. Click the "Unplug or Eject Hardware" icon again and disconnect the cable.
For detailed operations of OLYMPUS Master, refer to the quick start guide displayed upon startup
or the help of the OLYMPUS Master.
To download and save images to a computer without using
OLYMPUS Master
This camera is compatible with USB mass storage. You can connect the camera to your computer using the
USB cable provided with the camera to download and save images without using OLYMPUS Master. The
following environment is required to use the USB cable to connect the camera to your computer.
Windows: Windows 2000 Professional/XP Home Edition/XP ProfessionallVista
Macintosh: Mac OS X v10.3 or later
U
Note
• If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 38, press
t>,
and select [MTP] to use Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed
as
and home-built computers
To increase the number of languages
Make sure that your computer is connected to the Internet.
Plug the USB cable into the USB port on the computer.
Plug the other end of the USB cable into the camera's USB connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [PC], and press
~.
5
In the browse window, select "Camera", then "Update Camera/Add
Display Language".
• The confirmation window for updating is displayed.
Please take care that your battery is fully charged!
1
2
3