Olympus FE-320 Quick Start Manual page 27

FACE FOCUS
Highlighting a face in the picture
Your subject's face will be sharp and in focus. and the background will appear soft and out of focus. This
feature is applicable on the largest andlor closest face in the frame. The subject must be facing towards the
camera.
• Select the picture with
<ll>. and press ~ .
• There may be cases in which the camera cannot detect a face.
INDEX
Making an index picture from a movie
This function extracts 9 frames from a movie and saves them as a new picture
(INDEX) containing thumbnails of each frame.
• Use
<ll>
to select a movie and press ~.
Use the arrow pad to select the first frame and press ~. Select the last
frame in the same way and press ~.
EDIT
Cutting a part of the movie
Select a part of the movie you wish to save. overwrite the original file with it, or
save it as a new file.
• Select [NEW FILE] or [OVERWRITE] and press ~.
Use the arrow pad to select the first frame and press ~. Select the last
frame in the same way and press ~.
OTI
Protecting pictures
OFF ION
Protected pictures cannot be erased using [ERASE], [SEL. IMAGE] or [ALL
ERASE], but they are all erased by formatting.
• Select the picture with
<ll>.
and protect it by selecting [ON] with
~
\1.
You
can protect several frames in succession.
IOnI
is displayed when the picture
is protected.
o
Rotating pictures
aI
+90
0 I • 0 0 III;' -90 0
Pictures taken with the camera held vertically are displayed horizontally. This function lets you turn such
pictures so that they are displayed vertically. New picture orientations are saved even when the power is
turned off.
+90
0
0
0
-90 0
Select a picture with
<ll>.
and select
['CJ
+90
0
] / [ _
0
0 ]/[1"';-
-90
0
]
with
~
\1
to rotate pictures. You can rotate
several frames in succession. EN
21