Configure Area Code Set-Up - Nortel IP Phone 2004 User Manual

or

Configure Area Code set-up

The Area Code set-up menu enables a user to save up to 3 area codes.
When an incoming call arrives with an area code that matches one of the
3 stored area codes, the incoming call number is re-ordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number).
This re-ordering is also performed when a user scrolls through their
Callers List. To configure the area code, press the
select Call Log Option
To configure default area codes (3 maximum):
Configure options on the IP Phone 2004
4. Choose one of the following:
— Press the
setting.
— Press the
existing settings.
from the Telephone Option
1. Press the
scroll and highlight
2. Press the
3. Press the
scroll and highlight one of the following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
Select soft key to save the
Cancel key to keep
Services
menu.
Up/Down navigation keys to
Area Code
Select soft key.
Up/Down navigation keys to
key and
Setup.
47