Available Services; Object Push Services Via Beam - Motorola MC45 User Manual

7 - 8 MC45 User Guide

Available Services

NOTE Some devices might not require a PIN. This depends upon the device's authentication.
See the following sections for information on available services.

Object Push Services via Beam

NOTE You can only send files to a remote device using the Beam function.
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC45 and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > File Explorer.
3.
Navigate to the file to transfer.
4.
Tap and hold on the filename until the pop-up menu appears.
5.
File Explorer Window
Figure 7-7
Select Beam File. The MC45 searches for Bluetooth devices in the area.
6.
Tap Tap to send next to the Bluetooth device to send the file to. The MC45 communicates with the device and
7.
send the file. When completed, Tap to send changes to Done.