Cleaning Frequency; Troubleshooting; Mc45 - Motorola MC45 User Manual

Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the
3.
applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the
connector.
All sides of the connector should also be rubbed with the cotton tipped applicator.
4.
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
CAUTION
Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the surface.
5.
Ensure that there is no lint left by the cotton tipped applicator, remove lint if found.
6.
If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove.
7.
Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry
8.
before applying power to cradle.
If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry
humidity requires less drying time.

Cleaning Frequency

The cleaning frequency is up to the customer's discretion due to the varied environments in which the mobile
devices are used. They may be cleaned as frequently as required. However when used in dirty environments it
may be advisable to periodically clean the scanner exit window to ensure optimum scanning performance.

Troubleshooting

MC45

Troubleshooting the MC45
Table 9-1
Problem
MC45 does not turn
on.
Rechargeable battery
did not charge.
Cause
Battery not charged. Charge or replace the battery.
Battery not installed Install the battery properly. See
properly.
System crash. Perform a warm boot. If the MC45 still does not turn on, perform a
cold boot. See
Battery failed. Replace battery. If the MC45 still does not operate, perform a warm
boot, then a cold boot. See
MC45 removed Insert MC45 in cradle and allow to charge.
from cradle while
battery was
charging.
Extreme battery Battery does not charge if ambient temperature is below 0°C (32°F)
temperature. or above 40°C (104°F).
Maintenance & Troubleshooting 9 - 5
Solution
Installing the Battery on page
Resetting the MC45 on page
Resetting the MC45 on page
1-5.
2-17.
2-17.