Resetting The Mc45; Waking The Mc45; Locking The Mc45 - Motorola MC45 User Manual

Resetting the MC45

To perform a reset simultaneously press the Power button and the 1 and 9 keys.

Waking the MC45

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control
Panel time-out settings. These settings are configurable and the factory default settings are shown in are subject to
change/update. To change the wake-up conditions, tap Start > Settings > Power > Wakeup.
Wake-up Device Window
Figure 2-13

Locking the MC45

NOTE You can make emergency calls even when the MC45 is locked.
Use the Device Lock feature to prevent use of the device. Note that when locked, the MC45 does not respond to
screen or keypad input.
To lock the MC45, tap Start > Lock or press the Power button for three seconds and then tap Lock Device. The
Lock screen appears.
To unlock the MC45, side the Lock button to the left or right.
Using the MC45 2 - 17