Using The Map; Checking The Details Of A Map Location; Manipulating The Map - Blaupunkt TravelPilot 100 Instructions Manual

2 Getting started with TravelPilot

2.4 Using the map

The map screen is the most frequently used screen of TravelPilot. It can be accessed from the Navigation
menu by tapping
For further information about the map screen, see page 40.

2.4.1 Checking the details of a map location

• If you are interested in the details of your current position during navigation:
1. Check the bottom line of the map. It shows the current street.
2. For further details, tap
3. Tap
• You can check the details of any other location by selecting it on the map:
1. Tap the map anywhere to open the map control buttons.
2. Tap the desired location on the map. The Cursor (
location is displayed at the bottom of the map.
3. For further details, tap
4. Tap
•
It is even easier if you select the desired point in the Find menu. Then the Cursor menu opens
automatically. You only need to tap the

2.4.2 Manipulating the map

Position markers on the map:
• Current GPS position:
• Selected location (Cursor):
The following controls help you modify the map view to best suit your actual needs. Most of these controls
appear only if you tap the map once, and disappear after a few seconds of inactivity.
12
.
to open the Position menu.
. The address, the coordinate and the list of nearby POIs will be displayed.
to open the Cursor menu.
. The address, the coordinate and the list of nearby POIs will be displayed.
(page 19)
(page 20)
) appears there. The address of the
button.