Buttons And Other Controls On The Screen - Blaupunkt TravelPilot 100 Instructions Manual

2 Getting started with TravelPilot
You can turn mobile devices on or off at any time. When mobile devices is switched off, TravelPilot does
not calculate your GPS position and it does not update the route or the driving instructions.
When you turn the device on again, TravelPilot continues navigating as soon as the GPS receiver has
determined your position.

2.3 Buttons and other controls on the screen

When you are using TravelPilot, you usually tap buttons on the touch screen.
You only need to confi rm selections or changes in TravelPilot if the application needs to restart, it needs
to perform a major reconfi guration, or you are about to lose some of your data or settings. Otherwise,
TravelPilot saves your selections and applies the new settings without confi rmation as soon as you use
the controls.
Type Example
Button
Icon
List
Slider
10
Description How to use it
Tap it to initiate a Tap it once.
function, to open a
new screen, or to
set a parameter.
Shows status Some icons also
information. function as a
button. Tap them
once.
When you need to Turn the page with
select from several
the
options, they
buttons and tap
appear in a list.
the value that you
want.
When a feature has •
several different
unnamed values,
TravelPilot shows
an indicator on a
•
gauge that displays
and sets a value
from a range.
and
Drag the
handle to move
the slider to its
new position.
Tap the slider
where you
want the
handle to
appear; the
thumb jumps
there.