Cancelling Route Guidance; No Map Route Guidance - Blaupunkt TravelPilot RNS 3 Operating Instructions Manual

Table of Contents

Advertisement

Navigation

Cancelling route guidance

To cancel active route guidance,
Press ESC 9 or start new route guidance or activate the locating mode.
When you press ESC 9, you will be prompted to confirm your selection.
If you really want to cancel route guidance,
Select YES and
Press the right-hand rotary/pushbutton ;.
If you switch the system off during active route guidance, the data for route
guidance will remain stored for another 30 minutes. During this time you can
continue your trip with route guidance. After 30 minutes have passed, you must
start route guidance again.

NO MAP route guidance

NO MAP route guidance will be in effect if the navigation CD is removed after
the destination has been entered and route guidance has been started. During
NO MAP route guidance, you can use the integrated CD player to play audio
CDs (possible with navigation CDs starting with 1/99 only). When NO MAP route
guidance is active, NO MAP will appear in the top line of the display and the
distance to your destination as the crow flies will appear in the symbol field on
the left. In addition, the display will also indicate the direction to the destination.
Note: For technical reasons it may take several minutes for route guid-
ance to resume properly with spoken driving recommendations and
the pictograms after the CD-ROM has been re-inserted into the CD drive.
This time is required for the system to clearly identify the current vehi-
cle position. During this time, "OFF ROAD" may appear in the display.
In densely built-up areas with a closely woven network of roadways,
the locating function may not always be accurate until the system is
able to orient itself clearly. If possible, place the CD-ROM back into the
system on the motorway to speed up the locating process.
SVENSKA
DANSK
Cancelling route guidance
ENGLISH
217

Advertisement

Table of Contents
loading

Table of Contents