4.
Pick the settlement from the list.
5.
Enter the street name:
1.
Tap
2.
Start entering the street name on the keyboard.
3.
Get to the list of results:
•
After entering a couple of characters, the names that match the string appear in a list.
•
Tap
4.
Pick the street from the list.
6.
Tap the
7.
The map appears with the selected point in the middle. Tap
or
calculated, and you can start navigating.
3.1.2.2 Selecting an intersection as the destination
The procedure is explained starting from the Navigation menu.
1.
Tap the following buttons:
2.
By default, TravelPilot proposes the country/state and settlement where you are. If needed, tap the
button with the name of the country/state, and select a different one from the list.
3.
If needed, change the settlement:
•
To select the settlement from the list of recently used ones, tap the
•
To enter a new settlement:
1.
Tap the button with the name of the settlement, or if you have changed the country/state,
tap
2.
Start entering the settlement name on the keyboard.
Get to the list of search results:
3.
•
After entering a couple of characters, the names that match the string appear in a list.
•
Tap
4.
Pick the settlement from the list.
4.
Enter the street name:
1.
Tap
2.
Start entering the street name on the keyboard.
.
to open the list of results before it appears automatically.
button.
(Advanced mode) from the Cursor menu. The route is then automatically
(Simple mode), or
.
to open the list of results before it appears automatically.
.
3 Navigating with TravelPilot
(Simple mode)
,
(Advanced mode).
button.
29