Returning To Normal Navigation; Selected Location (Cursor) - Blaupunkt TravelPilot 100 Instructions Manual

2 Getting started with TravelPilot
• If you choose pedestrian: The
shows your actual heading.
• If you choose any of the vehicles: The
position errors. The direction of the icon is one of the directions of the route.
To use the current GPS position, tap
as one of the following:
•
a Favourite
• a Road Safety Camera
• a POI
• a map marker Pin

2.5.2.2 Returning to normal navigation

When GPS position is available, and you have moved the map (the
visible), or you have rotated the map in 3D mode, the
to the GPS position and re-enable Track-up map orientation (automatic map rotation).
Even if you move the map while you are driving, TravelPilot continues navigating if
Note!
there is an active route: it plays the voice instructions and displays the turn preview
icons according to your current GPS position.

2.5.2.3 Selected location (Cursor)

If you select a location in the Find menu, or you tap the map when the map control buttons are visible,
the Cursor appears at the selected point on the map. TravelPilot displays the Cursor with a radiating red
dot ( ) to make it visible at all zoom levels.
When the Cursor is set, tap
following:
•
the start point of a route
• a via point in a route
• the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
• a Favourite
• a Road Safety Camera
• a POI
• a map marker Pin
20
icon is at your exact GPS position. The direction of the icon
icon is aligned to the nearest road to suppress GPS
. The Position menu appears and you can save the GPS position
. The Cursor menu appears and you can use the Cursor as one of the
icon is moving or is not even
button appears. Tap it to move the map back