Position Menu; Route Information Screen - Blaupunkt TravelPilot 100 Instructions Manual

4 Reference book (Advanced mode)
Button

4.1.5 Position menu

When you follow the recommended route on the map (the Cursor is the current GPS position), the
Position menu replaces the Cursor menu. It does not contain buttons that modify the current route, as
the GPS position is not useful as a route point.
To open the Position menu, tap

4.1.6 Route Information screen

The Route Information screen has all the data and some of the functions you need while you navigate.
There are two ways to open this screen:
• It can be opened directly from the Map screen by tapping the Turn Preview fi eld (
• In Advanced mode, from the Navigation menu tap the following buttons:
In the top section of the screen you see information about the current route. The fi elds on this screen are
continuously updated while you keep the screen open.
When you open the screen, all fi elds contain information about reaching your fi nal destination. Tap any of
the fi elds to see data on the via points starting from the fi rst one through the fi nal destination again.
50
The Cursor is saved as the location of a Road Safety Camera (speed camera
or red light camera). A new screen appears where you can set the type
of the camera, the direction of the measured traffi c, and the speed limit
checked (if applicable).
If the Cursor is at or near a Road Safety Camera, this button replaces the
previous one, and opens a new screen where you can edit the details of the
camera.
The location of the Cursor is added to the list of frequently visited destinations,
the so called Favourites. You can give a name for the Favourite.
.
Description
).
, .