Netware; Configuring Netware Settings; Service Advertising Protocol - Xerox ColorQube 9301 System Administrator Manual

NetWare

NetWare is a network operating system developed by Novell to run various services using cooperative
multitasking.
Before you begin:

Ensure an existing operational NetWare network is available.

Verify that you have administrator rights to log in to a NetWare file server or tree.

Ensure that the printer is connected to the network.

Set up a print server object using the appropriate Novell utility. Refer to the Novell system
documentation for help.

Configuring NetWare Settings

In CentreWare Internet Services, click Properties > Connectivity > Protocols.
1.
2. Click NetWare.
Select Enabled to enable the protocol.
3.
4. Select IP or IPX from the Filing Transport menu.
5. Select the Frame Type from the menu. Options are:

Auto

Ethernet II

Ethernet 802.2

Ethernet 802.3
6. Type a polling rate between 1–240 seconds for the print server in Queue Poll Interval. The default
value is 5 seconds.
7. Type the Printer Server Name. The default name is XRX_MAC address.
8. Type then retype the server password in the New Print Server Password and Retype New Print Server
Password fields.
Enable Select to save new password.
9.

Service Advertising Protocol

Service Advertising Protocol (SAP) sends periodic broadcast messages to other network components
about available services on the printer. SAP facilitates dynamic adding and removing of services on an
IPX internetwork. As servers start up and shut down, they can advertise and remove their services using
SAP.
1. Under Protocol, select Enabled.
Under SAP Frequency, type the time in seconds between 15–300. The default time value is 60
2.
seconds.
ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Network Configuration
23