Hardware Installation And Connections; General Installation Instructions; Main Chassis Installation; Rack-Mounted Installation Requirements - ZyXEL Communications IES-5106M User Manual

C
H A P T E R
Hardware Installation and
This chapter describes how to install and connect the IES-6000M and line cards.

2.1 General Installation Instructions

Perform the installation as follows:
• Make sure the IES's power switches are in the OFF position.
• Install the main chassis as detailed in this chapter. Make sure you connect the
frame grounds before you make any other connections.
• If line cards are not already installed, follow the procedure in the next section to
install them.
• Refer to Section 2.6 on page 47
Telco-50 connectors.
• Refer to Section 2.7 on page 57
• Refer to Section 2.8 on page 59
and turning on the IES.

2.2 Main Chassis Installation

This section explains how to install the main chassis on a rack. If you are installing
the main chassis without a splitter chassis, you can install the main chassis on a
desktop instead.

2.2.1 Rack-mounted Installation Requirements

Make sure the rack will safely support the combined weight of all the equipment it
contains.
• Use a #2 Phillips screwdriver to install the screws.
IES-5106M / IES-5112M / IES-6000M User's Guide
Connections
for instructions on making connections with
for instructions on making alarm connections.
for instructions on making power connections
2
19