ZyXEL Communications IES-5106M User Manual page 21

Figure 8 IES-6000M Airflow
Use the following procedure to install the main chassis in the rack.
Note: Install the main chassis and splitter chassis in a rack with the splitter chassis
directly below the main chassis.
Note: For the IES-5106M, If you are using 72-port line cards, use two IES-5005ST
splitter chassis. If you are using 48-port line cards, use one IES-5005ST splitter
chassis and one IES-5002ST splitter chassis.
Note: For the IES-5112M, If you are using 72-port line cards, use two IES-5000ST
splitter chassis. If you are using 48-port line cards, use one IES-5000ST splitter
chassis and one IES-5002ST splitter chassis.
Note: For the IES-6000M, if you are using a single management card in the main
chassis, install the IES-3016ST splitter chassis (which provides 16 splitter or
extension card slots). If you are using two management cards in the main
chassis, install the IES-3000ST splitter chassis (which provides 15 splitter or
extension card slots).
Position a mounting bracket on one side of the chassis, making sure the screw
1
holes on the bracket are on the same side as the front panel of the main chassis.
Use the screwdriver to install the screws through the mounting bracket holes into
2
the main chassis.
IES-5106M / IES-5112M / IES-6000M User's Guide
Chapter 2 Hardware Installation and Connections
21