Procedure To Remove And Install The Ies-6000M Fan Module - ZyXEL Communications IES-5106M User Manual

Figure 56
4.1.2 Procedure to Remove and Install the IES-6000M Fan
Module
The IES main chassis has a hot-swappable fan module. The IES-6000M fan
module is located above the slots and below the power modules on the front
panel. Replace the entire fan module if the fuse is not the problem. Return any
malfunctioning fan modules to the manufacturer.
Perform the following procedure to remove the fan module in order to change a
fan fuse or the fan module.
Loosen the thumbscrews on the front of the fan module.
1
Slide out the fan module.
2
Replace the fuse if it is burnt out (see
3
If the fuse is not the problem, use a different fan module from the manufacturer.
Slide the fan module back into the fan module slot.
4
Tighten the thumbscrews.
5
IES-5106M / IES-5112M / IES-6000M User's Guide
IES-5106M/IES-5112M Fan Module (Location of Fuse Indicated)
Chapter 5 on page 75
Chapter 4 Maintenance
for fuse information).
69