Table of Contents
Advertisement
Hareware Setup
JP43: CPU Cooling Fan Connector
This 3-pins connector provides 12V power for the CPU cooling fan
which matches the pin assignment of this connector. If you enable the
Suspend Mode function in BIOS setup, this fan will stop when the
system is into the suspend mode.
Note:
Make sure the pin assignment of our CPU Cooling Fan is
matched with this connector before connecting it, otherwise,
you may damage either the mainboard or the cooling fan.
FDC — FDC Connector
Attach floppy cable to this connector.
ATX PW — ATX Power Supply Connectors
The motherboard provides an ATX power supply connector. It is a
twenty-pin male header connector. Plug the connector from the power
directly onto the board connector while making sure the pin1 is in its
position.
11
CPU Cooling Fan
Connector
(Pin Assignment)
3
2
1
20
17
Advertisement
Table of Contents
