Pnp/Pci Configuration Setup - SOYO 5XAE5 User's Manual & Technical Reference

BIOS Setup
Primary/Secondary
IDE 0
Primary/Secondary
IDE 1
Floppy Disk/
Serial Port/
Parallel Port
3. After you have finished with the Power Management Setup, press
the <ESC> key to return to the Main Menu.

PNP/PCI Configuration Setup

This option sets the mainboardÕs PCI Slots. Run this option as follows:
1. Choose ÒPNP/PCI CONFIGURATION SETUPÓ from the Main
Menu and the following screen appears. (The screen below shows
default settings.)
Resources Controlled By
Reset Configuration Data : Disabled
IRQ-3 assigned to : Legacy ISA*
IRQ-4 assigned to : Legacy ISA*
IRQ-5 assigned to : PCI/ISA PnP*
IRQ-7 assigned to : PCI/ISA PnP*
IRQ-9 assigned to : PCI/ISA PnP*
IRQ-10 assigned to : PCI/ISA PnP*
IRQ-11 assigned to : PCI/ISA PnP*
IRQ-12 assigned to : PCI/ISA PnP*
IRQ-14 assigned to : PCI/ISA PnP*
IRQ-15 assigned to : PCI/ISA PnP*
DMA-0 assigned to : PCI/ISA PnP*
DMA-1 assigned to : PCI/ISA PnP*
DMA-3 assigned to : PCI/ISA PnP*
DMA-5 assigned to : PCI/ISA PnP*
DMA-6 assigned to : PCI/ISA PnP*
DMA-7 assigned to : PCI/ISA PnP*
*: These items will disappear when Resource Controlled. is Auto.
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
Choose Enabled or Disabled (default).
Enabled Ð Enables the power management
timers when Òno activityÓ event is
detected.
Choose Enabled or Disabled.
Enabled Ð enables the power management
timers when Òno activityÓ event is
detected.
ROM PCI/ISA BIOS
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: Manual PCI IDE IRQ Map To
Primary
Secondary IDE INT# : B
Used MEM Base Addr
ESC : Quit
F1
F5
F6
F7
: PCI-AUTO
IDE INT# : A
: N/A
↑ ↓ → ←: Select Item
: Help PU/PD/+/– : Modify
: Old Values (Shift)F2 : Color
: Load BIOS Defaults
: Load Setup Defaults
31