Ide Led Ð Ide Hdd Led Connectors; Fdc Connector; Prt Ð Parallel Port Connector; Usb1/Usb2 Ð Universal Serial Bus Connector - SOYO 6KD User's Manual & Technical Reference

Hardware Setup
IDE LED – IDE HDD LED Connectors
Attach on-board IDE device LEDs to this connector. The LED lights
when an IDE device is active.

FDC Connector

Attach floppy cable to this connector.
PRT – Parallel Port Connector
Attach parallel port cable to this connector.
USB1/USB2 – Universal Serial Bus Connector
Attach USB cable to these connectors for external USB device.
PWRBT – ATX Power Supply On/Off Switch Connector

(Momentary Type)

Attach a two-pin switch to this connector for turning the ATX power
supply on/off.

JP42, JP43: CPU Cooling Fan Connector

This 3-pins connector provides 12V power for the CPU cooling fan
which matches the pin assignment of this connector. If you enable the
Suspend Mode function in BIOS setup, this fan will stop when the
system is into the suspend mode.
Note: Make sure the pin assignment of our CPU Cooling Fan is matched
with this connector before connecting it, otherwise, you may
damage either the mainboard or the cooling fan.
CPU Cooling Fan
Connector
(Pin Assignment)
9