Chapter 2: Hardware Setup; Jumpers; Jp5: Cmos Clear Jumper; Jp40: Ce Test Jumper Pin - SOYO 5XAE5 User's Manual & Technical Reference

2 Hardware Setup
This chapter explains how to configure the mainboardÕs hardware. After
you install the mainboard, you can set jumpers, install memory on the
mainboard, and make case connections. Refer to this chapter whenever
you upgrade or reconfigure your system.
CAUTION:
Turn off power to the mainboard, system chassis, and
peripheral devices before performing any work on the
mainboard or system.

Jumpers

JP5: CMOS Clear Jumper

Clear the CMOS memory by momentarily shorting pin 2Ð3; then
shorting pin 1Ð2 to retain new settings.

JP40: CE Test Jumper Pin

This connector is reserved for the CE test. If you run into problems
during the CE test, unplug the jumper pin and try again.
CMOS Setting
Retain CMOS data
(default)
Clear CMOS data
JP5
1
1